Undergoung Utilities and their Standard Colors
Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Although not completely eliminated, risks today have been reduced. If there is a need to dig the ground, it is very important that the utility lines first be identified. The OSHA requires that utilities underground first be located before digging through a piece of land. Otherwise it can be something disastrous. The worst thing that can happen if lines are not identified is that fatal injuries can happen. Services in the area where the lines are located can experience interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Utility companies can then mark out their respective lines when you call them out.
Sometimes, even if the lines are marked accidents still happen. Utility lines are struck every 6 minutes, some place. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.
GPR or Ground Penetrating Radar is used by companies to locate their utility lines. When locating utility lines underground, this machine makes it easy to do so. Companies can locate their utility lines if any property owner calls 811.
It is easier to identify underground utility lines today because they now use different colors for each utility. Here are the colors used for different utilities.
White lines are for proposed excavation sites. You can mark areas with white lines that will soon be excavated.
If you see pink lines, they are temporary survey markings. Legal property boundaries are marked off by these pink lines.
Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is perfect for electric works because it is associated with fire and danger.
Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.
Orange lines are used for communication, alarm, signal lines, cable or conduit. Lines for potable water use blue lines. Purple lines are used for reclaimed water, irrigation, and slurry lines. If you see the color green, then it indicates sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.